Antoine Chedin, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - Hot Air Balloon project
Eugene Laporte, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - Elevated Pressure and Temperature Hydrogen and Methane Blend project
Leo Distelzwey, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - Particle Imaging Velocimetry (PIV) project
Neil Abdelaziz, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - High Pressure Water Addition to Coflow Flames
Paul Renault, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - Gas Hydrate Combustion project
Santiago Rabec, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - Gas Hydrate Fire Extinguishment project
Jules Constant, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 - Holography Imaging project
Kerian Jeanne Rose, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2023 (Spring) - Particle Imaging Velocimetry (PIV) flow system desgin and measurement
Alexis Rouault,Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2022 - Water addition and high pressure combustion
Antoine Guillemenot, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2022 - Hydrogen blended fuel in high pressure conditions for diagnostics
Maxime Donzeau, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2022 - PeleLM CFD simulation for E-FIELD Flames
Thomas Ristor, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2022 - Carbon dioxide hydrate for fire extinguishment
Hugo Girodon, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2021 - CFD Modeling of pressurized laminar coflow (non premixed) diffusion Flames with water addition
Baptiste Campenon, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2019 - Holography Research
Eleonore Moinet, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2019 - Water-vapor Laden Fuel Research
Florent Cathary, Aix-Marseille Universite, 2019 - Methane Hydrate Combustion Research
Julia Reny, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2019 - Sulfur Catalyst Effect Research (senior project)
Valentin Morin, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2018 — Design of experiment for CO2 replacing methane in hydrates
Valentin Michaud, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2018 — Characterizing particle size and smoke volume of e-cigarettes using light scattering
Guillaume Coden, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA)), 2018 — CFD of flow in an optical cell for measuring SO3 and H2SO4
Thomas Guedon, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2017 — Methane hydrates growth
Thibault Pecoul, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — High temperature test cell for sulfur species simulating emission from a power plant flue
Sarah Benhaddou, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — Treatment of exhaust gases using non-thermal plasma
Samuel Perceval, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2017 — Experimentation and instrumentation of a 50cc scooter engine to improve its environmental performance
Romain Bouyer, Ecole des Mines dAles (EMA), 2016 — Characterization of controlled conversion efficiency of SO2 to SO3 over a catalyst
Quentin Dupuis, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — Water-added counterflow diffusion flames
Mohamed Azri, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — Optical measurements in high pressure combustion
Marion Lallemand, Ecole dingenieurs (EFP), graduate School of Engineering, France, 2017 — Tubular flame burner design and analysis
Louise Autef, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — Experiments and modeling of small diffusion flames in electric fields
Guillaume Bernard, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — Electrically controlled flames
Gaetan Ruscade, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — High pressure calibration cell for coherent anti-Stokes Raman spectroscopy
Flavien Bart, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — High pressure flow tunnel characterization (senior project)
Alexandre Schwartz, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2016 — Measurement and calculation of sulfur species in simulated power plant flue gas
Chaobo Yang, 2015-2016, visiting Ph.D. student, HIT — Hybrid CARS
Marisela Miramontes, UC-LEADS Scholar, 2015 — 3D printing of combustion
Andres Vargas — UC-LEADS Scholar, 2015 — Hot wire anemometry of burner
Pedro Munoz — CAMP Summer Scholar, 2015 — Hot wire fabrication
Ahmed Alharbi, Muath Askar — SAU Summer Program, 2015 — Solar cookstove thermal/mechanical design
Muath Askar — SAU Summer Program, 2015 — Solar cookstove thermal/mechanical design
Saad Almuhanna — SAU Summer Program, 2015 — Particle image velocimetry (PIV)
Samuel Cabrera — CAMP Summer Scholar, 2015 — Solar stove thermal contact resistance
Joseph Sanchez — CAMP Summer Scholar, 2015 — High pressure electrolysis
Kaio Paes — Brazil Science Without Borders Scholar, 2015 — Small reciprocating engine testbed instrumentation
André da Silva — Brazil Science Without Borders Scholar, 2015 — Liquid film combustor
Adam Farsheed, 2015 Northwestern University internship — High pressure salt water tunnel design
Jordan Bilbault, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2015 — High pressure combustion flow panel design and thermal analysis
Antony Delavois, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2015 — High pressure/low temperature salt water flow tunnel design and thermal analysis
Gaétan Crouzy, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2015 — High pressure CARS calibration cell
Adrien Ruas, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2015 — Water-laden fuel diffusion coflow burner
Remy Petit, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2015 — Accurate measurement of volumetric flow from dissociating hydrates
Guillaume Eplenier, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2015 — Chemical kinetics calculations of flames with ions and excited species
Albert Aguilera Roman, 2015, Escola Tècnica Superior d'Enginyeries Industrial i Aeronàutica de Terrassa (ETSEIAT), University Politecnica de Catalunya (UPC), M.S. internship — Electrical Aspects of Combustion
Jaume Felip Escol`a, Tcnica Superior d’Enginyeries Industrial i Aeronutica de Terrassa (ETSEIAT), University Politecnica de Catalunya (UPC), Engineering Degree, 2015 – Pressure Measurements in a Small IC Engine
Claudia Lopez Camara, Escola Tcnica Superior dEnginyeria Qumica (ETSEQ), Universitat Rovira i Virgili (URV), M. Sc. internship, 2014/2015 – Numerical Simulation of a Co-Flow Methane/Air Flame Including Ions and Excited Species
Adriana Lladó Gambin, 2015, Tcnica Superior d’Enginyeries Industrial i Aeronutica de Terrassa (ETSEIAT), University Politecnica de Catalunya (UPC), M.S. internship — Color-ratio thin filament pyrometry for temperature measurements in methane/air counterflow flames
Andrea Biasioli, 2014, Milano Polytechnic(Politecnico di Milano) M.S. internship — Carbon Dioxide and Methane: Solubility and Diffusion in Water, Hydrates Growth and Burning
Yoann Haucourt, 2014, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) internship — Spray rig for testing ballistic imaging holography
Antony Collé Vallejo, 2014, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) internship — Surfactant effects on dissolved methane gas in water
Camille Saux, 2014, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) internship — Image processing for feedback controlled flow tunnel
Pierre Lemarié, 2014, EEcole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) internship — Laser spectroscopy for combustion diagnostics
Saud Alanazi, 2014, SAU internship — Desalination using hydrates
Michela Vicariotto, 2014, M.S. , Milano Polytechnic(Politecnico di Milano) — Laser ignition of methane hydrates
Valentina Ricchiuti, M.S. , Milano Polytechnic(Politecnico di Milano) — Combustion modeling using OpenFOAM
Joan Santacana Vall, 2013, Tcnica Superior d’Enginyeries Industrial i Aeronutica de Terrassa (ETSEIAT), University Politecnica de Catalunya (UPC) , M.S. internship
Laia Torregrosa Sauret, 2012/2013, Tcnica Superior d’Enginyeries Industrial i Aeronutica de Terrassa (ETSEIAT), University Politecnica de Catalunya (ETSEIAT), M.S. internship
Marco Minniti, 2012-2013, Milano Polytechnic(Politecnico di Milano), M.S. internship
Arnaud Lemoine, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Ballistic Holography
Clément Fillon, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Water Desalination via Gas Hydrate Production
Thomas Payet-Burin, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Optimizing the Optics in a Stored Energy Cookstove
Victor Viaud, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Design and Development of a Tool to Assist the Teaching of Control Theory
Nils Bechmann, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – High Pressure Calorimeter
Quentin Bervas, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Quantifying the Melting and Evaporation Rates of a Burning Methane Hydrate
Simon Deguillaume, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Aqueous Urea/SCR at Low Temperatures
Sybille Drevon, 2013, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. – Droplet generator and Flat Flame Burner for Biofuel Evaluation
Philippe Diollot, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Small engine combustion and emissions
Sliman Bouazzaoui, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Small engine combustion and emissions
Tony Martinet, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Coal combustion in an entrained flow reactor
Dorian Midou, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Automation for pulsed dye laser scanning in combusiton diagnostics
Valentin Thomas, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Burning methane clatherates and gel fuels
Kevin Haras, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Particle sizing of cookstove smoke
Antoine Larignon, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Thermal modeling of ice and hydrates for clathrate combusion
Fabien Plongeron, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Image processing for chemiluminescense in sooting flames
Marie Vinay, 2012, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA) — Small engine test stand for biofuel operation
Oscar Martinez, 2012, ISAE Supaero — Droplet evaporation in turbulent flow
David Mazo, 2012, ISAE Supaero — Droplet evaporation in turbulent flow
David Escofet Martin, 2012, Tcnica Superior d’Enginyeries Industrial i Aeronutica de Terrassa (ETSEIAT), University Politecnica de Catalunya (UPC), M.S. internship — Laser Induced Fluorescence Studies
Mishal Rosi Francis, 2012, Univ. of Glasgow, M.S. — Detecting electric field effects on flames using mid-IR photodiodes
Joshua L. Jacobs, Univ. of Glasgow, M.S 2012 — Quantitative chemiluminescence from small diffusion flames
Benjamin Debareix, 2011, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. — Using Open FOAM for Combustion Simulation
Jeremie Descours, 2011, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), M.S. — Computational Fluid Dynamics of Coal Combustion
Claudio Giani, 2011, Milano Polytechnic(Politecnico di Milano), M.S. — Miniature Liquid Fuel Film Combustion
Julien Glorian, Ecole Nationale Superieure de Mecanique et dAerotechnique (ISAE-ENSMA), 2011 M.S. — Parametric Studies of Electrical Fields on Flames
Luca Castronuovo, 2010 — Aluminum Nanoparticle Combustion in Air
Jonathan Arici, Polytechnic Milano — Engineering Degree student, 2007/2008 – Experiments in a Model Turbine Burner
Francesco Borgatelli, Polytechnic Milano — Engineering Degree student, 2006 – Feedback control of flames with electric fields.
John Garman – Post Doctoral Scientist, 2006-2008 — Laser Diagnostics in Combustion; Miniature Engine Combustion
Kiyotaka Yamashita, Post Doctoral Scientist, University of Tokyo, 2008 — Numerical Simulation
Yeuh-Heng (Zic) Li, 2005-2006, visiting Ph.D. student, National Cheng Kung University, Taiwan — Combustion of liquid films on flat plates
Nicola Amade Sarzi, Polytechnic Milano — Engineering Degree student, 2005 – Annular film combustor (with Prof. W.A. Sirignano)
Elisangela Leal – Post Doctoral Researcher, 2003-2005 — Portable power; fuel cells (with Prof. F. Jabbari and Dr. J. Brouwer)
Amauri Leal – visiting M.S. student, Brazil, 2003-2005 — On board methanol reformer for miniature IC engines
Roberto Mattioli, Polytechnic Milano, Engineering Degree student 2006/2007 – Miniature Liquid Film Combustors with Secondary Air Injection
Andrea Favalessa, University of Padua, Engineering Degree student, 2004 – Heat recirculating burner
Simone Stanchi, Polytechnic Milano, Engineering Degree student, 2002 – Pressurized miniature film combustor (with Prof. W.A. Sirignano)
